Newsroom

Eoptolink continues to lead the way with 400G Transceiver developments

Eoptolink has been busy since last year’s OCP Global Summit 2019 and continues to lead the way with its 400G transceiver developments. Since last year’s Summit its 400G transceivers have been successfully qualified and launched by leading switching partners and are shipping into Cloud and ISP deployments.

Eoptolink has a complete range of Single-Mode 400G and 100G Single Lambda transceivers. 400G FR4 and LR4 are now available allowing 2km and 10km point to point connectivity. 400G DR4 is available in 500m, 2km and 10km providing good flexibility in breakout applications. DR1, FR1 and LR1 are available in 100G single lambda versions to complement the DR4 models. At the OCP Global Summit Eoptolink will demonstrate some of its next generation transceivers for 400G and 4x100G applications.

Eoptolink is also proud to be working with Innovium and has verified its transceivers with their TERALYNX? switch systems. This interoperability has been an invaluable corroboration for our customers. Amit Sanyal, VP of Product Management and Marketing at Innovium Inc. says, “Innovium is the only switch silicon provider of robust 1 to 12.8Tbps PAM4 networking solutions with consistent feature-set, and architecture scaling to 51.2Tbps+. We are excited to see TERALYNX? switch systems designed by world’s leading system partners being deployed by top cloud customers,” Sanyal goes on to say, “We have collaborated closely with Eoptolink to validate 100-400G optics, so customers can benefit from validated 12.8Tbps switching solutions with lowest latency, unmatched telemetry, programmability and best economics.”

Eoptolink is demonstrating its 400G and 100G transceiver family with Innovium’s 32port TERALYNX? switch at 2020 OCP Global Summit. The 32 port TERALYNX? switch combined with Eoptolinks 400G 4xSN QSFP-DD DR4 results in a 1U solution with 128 individual 100Gbps interfaces. The highest density for individual 100G ports.

Please feel free to come along for a live demo at our stand #C27 at the San Jose Convention Center, San Jose, California between March 4th and 5th 2020. For further information please contact sean.davies AT eoptolink.com

Eoptolink adds extended reach PSM modules to its 400G QSFP-DD and OSFP portfolio

Dublin, Ireland, September 23, 2019 – Eoptolink Technology Inc., Ltd (SZSE: 300502) today announced general availability of extended reach 400G optical modules.

The EOLD-134HG-02-M and EOLD-134HG-10-M are QSFP-DD transceivers and they have an optical MPO interface with 4 independent 100G single lambda data lanes. The power consumption for both modules is <10W at 70?C and both are supporting “break-out” applications. The EOLD-134HG-02-M supports a transmission distance of 2km and follows the FR specification of 100G Lambda MSA. The EOLD-134HG-10-M supports the transmission of up to 10km and follows the LR specification of 100G Lambda MSA. EOLO-134HG-02-M and EOLO-134HG-10-M are OSFP transceivers and offer the same functionality in an OSFP form-factor.

“Customers are using these modules in high port density required 100G applications”, explained by Sean Davies. “A 1U switch can now offer 128x 100G ports”.

Eoptolink also offers the corresponding 100G QSFP28 FR and LR transceivers, enabling the customer to apply the 100G single lambdas in legacy QSFP28 equipment.

? EOLD-134HG-02-M (400G QSFP-DD, 4x100G FR, 2km, MPO)
? EOLD-134HG-10-M (400G QSFP-DD, 4x100G LR, 10km, MPO)
? EOLO-134HG-02-M (400G OSFP, 4x100G FR, 2km, MPO)
? EOLO-134HG-10-M (400G OSFP, 4x100G LR, 10km, MPO)
? EOLQ-131HG-O-02 (100G QSFP28, 100G FR1, 2km, LC)
? EOLQ-131HG-O-10 (100G QSFP28, 100G LR1, 10km, LC)

 

Eoptolink 400G QSFP-DD and OSFP Transceivers fully support CMIS4.0

Dublin, Ireland, September 23, 2019 – Eoptolink Technology Inc., Ltd (SZSE: 300502) today announced the full support of CMIS 4.0 for its 400G QSFP-DD and OSFP optical transceivers.

CMIS 4.0 enables customers to upgrade MCU and DSP firmware from the host system, offer additional digital diagnostics and has an improved state machine.
Diagnostic functions include
? PRBS Generation and Checking
? Loopback functions
? SNR data
? PAM4 Level Transition Parameters
? Pre-FEC BER and Uncorrected Error Count data

“We are pleased that our complete OSFP and QSFP-DD transceiver portfolio can now be ordered with either CMIS 3.0 or CMIS 4.0 support”, says Sean Davies, Director of Sales in Americas.

 

Eoptolink has a strong portfolio of industrial temperature SFP+, SFP28 and QSFP28 transceivers supporting 10G/25G Ethernet and CPRI protocols.

Eoptolink has a strong portfolio of industrial temperature SFP+, SFP28 and QSFP28 transceivers supporting 10G/25G Ethernet and CPRI protocols. Our i-temp transceivers operate from -40?C to +85?C and do not need a warm up period to achieve a higher operating temperature.

The QSFP-DD form-factor doubles the number of data-lines between the host equipment and the transceiver.

Eoptolink’s 2x100G transceivers take advantage of this new building practice and offer two 100G interfaces in one QSFP-DD transceiver. The 100G interfaces are fully compatible to CWDM4, 4WDM-10 or LR4 standards.
These transceivers offer a way of either increasing the port density in 100G switches or to connect in 400G switches more effectively to legacy equipment.

Eoptolink

Connect

Contact our global sales team

This email address is being protected from spambots. You need JavaScript enabled to view it.

Contacts

Invalid Input
Invalid Input
Invalid Input

Newsletter

Invalid Input
X