Newsroom

Eoptolink is proud to announce general availability of its 400G QSFP56-DD transceivers with Senko’s SN? connector. The SN? connector is a new generation of duplex optical fiber connector designed for Data Centers and 400G operation. The connector was designed to provide an alternative to MPO connectivity and uses individual and independent duplex fiber breakout at 400G QSFP56-DD or OSFP. SN connectors offer a simpler and more efficient fiber infrastructure, and at the same time increased reliability. The design of the SN? connector allows users to have four individual connectors with eight fibers in total, within a single QSFP-DD and OSFP transceiver interface. A 32x 400G switch can now be configured to act as a 128x 100G switch. All in 1U rack space.

Eoptolink has developed QSFP28 ZR4 80km  with excellent transmission performance. 100GE QSFP28 ZR4 module support 80km based on SM fiber without any external EDFA or DCM, low power consumption and good optical budget, solution is dedicated for metro and DCI scenario, transceiver can be used in most legacy switches, routers and transmission equipment for p2p applications, PN: EOLQ-161HG-80-L7

CHENGDU, China, February 28, 2020 – Eoptolink Technology Inc., Ltd (SZSE: 300502) today announced the immediate availability of its SFP56-DD optical transceiver products.

The last 12 months has seen several significant developments at Eoptolink culminating in the successful launch of its 400G transceiver portfolio. QSFP56-DD and OSFP Form Factors enable point to point and 1:4 breakout applications up to 10km. DR1, FR1 and LR1 Single Lambda 100G models were also launched to support DR4 applications. Now, after the successful launch of its QSFP28  family, Eoptolink is proud to unveil its SFP56-DD family too. Three flavors, DR1, FR1, and LR1 are available with immediate effect:

EOLSD-131HG-O-5H-36: SM SFP56-DD 100G 500m, MSA and RoHS compliant, <3.5W
EOLSD-131HG-O-02-36: SM SFP56-DD 100G 2km, MSA and RoHS compliant, <3.5W
EOLSD-131HG-O-10-36: SM SFP56-DD 100G 10km, MSA and RoHS compliant, <3.5W

Eoptolink will be at OFC 2020 in San Diego and welcomes you to its stand #4220 for a demonstration of these and all their latest developments. For the SFP56-DD demonstration Eoptolink is proud to announce its joint collaboration with Nokia  where it will be showcasing a live demonstration of the world's first ever 100G Single Lambda SFP56-DD form factor transceivers in Nokia 7750 SR series of routers.

Eoptolink has been busy since OFC 2019, successfully launching its 400G QSFP56-DD and OSFP and 100G QSFP28 Transceiver families. The transceivers are now qualified and approved by leading switch vendor partners and shipping in to Cloud and ISP deployments.

Eoptolinks 400G DR4 family is available in 500m, 2km and 10km variants allowing good flexibility in breakout applications. DR1, FR1 and LR1 are available in 100G single lambda versions to complement the DR4 models. The next evolution of their DR4 transceiver family sees Eoptolink continue its successful business relationship with SENKO Advanced Components as a licensee of SN? technology and the adoption of the SN connector as an alternative to the MPO connector typical in DR4 transceivers. With SENKO’s SN connector, which is a duplex connector with two LC ferrules vertically aligned, four SN connectors fit in the same sized aperture as a single MPO connector. The beauty of this approach is that it enables four discrete point to point circuits to be handled independently of each other. Four point to point circuits are enabled between each of the 100G Single Lambda transceivers and the individual SN connectors on the DR4 so if one circuit needs to be worked on, the other three circuits need not be affected.

Eoptolink is proud of its business relationship with SENKO and this development offers its customers greater flexibility in their network rollouts. “SN connector will bring more flexibility, scalability, and efficiency in the network design and use” said Tiger Ninomiya at SENKO, “SENKO is delighted to work with Eoptolink on SN technology to support 400G roll out in the market.”

Eoptolink is demonstrating its 400G and 100G Optical Transceiver families at OFC 2020 including the use of the SN connector. Please come to our stand 4220 for a live demo. For further information please contact sean.davies AT eoptolink.com

* SN ? is a Registered Trademark of Senko Advanced Components, Inc. 2019 ?